This study is concerned with the identification of the validity of the Recent sediments deposited in the Playa for the purpose of making the laboratory bricks by extrusion and pressing. The steps followed in this study included the formation and then burning of the pyramids at (950-1100) C° for one hour of maturity to determine their applicability to the brick industry. The study area is located in Al Muthanna province, south of Iraq. It is located south of the district of Samawah at a distance of 80 km and to the north-west of Salman district, 64 kilometers south of Baghdad, represented by three hosts: (DHS 1, DH2 and S). The results of the chemical analysis of the study samples showed that they consist of the following major oxides: SiO2 = (39.34-42.82) TiO2 = (0.52-0.76) Na2O3 = (0.97-1.22) Fe2O3 = (4.19-5.89) CaO = (14.78-19.4) K2O = (0.91-1.14) Al2O3 = (8.02-9.85) MgO = (3.85-5.95) L.O.I = (16.31-19.32) silica SiO2 represented the highest ratio followed by Al2O3. Was manufactured 36 samples of the laboratory were manufactured and prepared by extrusion method were measured in dimensions (7 * 3.5 * 2.5) cm by extruding method and were burned at (950-1100) C° for the purpose of conducting physical and mechanical checks on them including Linear and volume shrinkage, color, Water absorption, Efforescence, and compressive strength. The results of these tests showed a decrease in water absorption and Efforescence, a decrease in the values of compressive strength with increased burning temperature, decreased Linearand volume shrinkage in most samples and increased in other samples with increasing burning temperature. In addition, 12 samples were made of the cylindrical laboratory size (diameter 50 mm, height 60 mm) in semi-dry pressing method, and were burned at (950-1100) C° for the purpose of physical and mechanical tests, color, Water absorption, Efforescence, and compressive strength. The results of these tests showed a decrease in water absorption and Efforescence and an increase in the values of compressive resistance while increasing the temperature of burning, while the colors of the samples ranged from light brown and yellow or pale yellow to white. The results of physical assays were met Linear and volume shrinkage, color, Water absorption and Efforescence. As well as mechanical tests: compressive strength results were in accordance with the Iraqi standard for this industry where the data of the results of this study showed the validity of these samples for the industry mentioned above.
Refractories are mineral and chemical-, based, materials with excellent heat resistance, making them ideal for use in the construction of ovens, furnace walls industries. According to this our research is concerned to study the effect of addition of (4% CaO) and (5% graphite) on the silica brick properties. Different amounts of CaO and Graphite were included in the white sand (raw ingredients) of silica bricks as a binder to prepare the composition then the composition were sintered using Different sintering temperatures ranging from (1000–1400)𝛐C under static air. Density, thermal conductivity, porosity, and water absorption Compression there was power tested after sintering. XRD analysis was used to identify raw materials’
... Show More
The study area is part of the city of Samawa in Al Muthanna Governorate in southern Iraq. The study area is located to the west of Samawa city bounded by the north latitudes 31⁰11'-31o42' and east longitudes 44o58'- 45⁰16'and its groundwater resources are developed for supply and irrigation purposes. In order to evaluate the quality of groundwater in the study area, twenty three groundwater samples were collected and analyzed for physical and chemical parameters. Hydrochemical analysis showed that the groundwater of the study area is excessively mineralized and very hard. The increase in flow length of groundwater in the study area caused a change in water
... Show More
(1)
An electrical survey was carried out by using 2D imaging technique at (15)
station. The study area is located southern Al-Shihaby area, south-east of Wasit
governorate, Eastern Iraq. The numbers of the employed electrodes were (120) and
the (a) spacing equal to (10m), and the total length of survey line is (1200m). The
inverse models of 2D imaging showed one Quaternary aquifer located in the
Quaternary deposits which comprises in alluvial fan and wind deposits of
(Pleistocene – Holocene) ages. Layers of aquifer consist of gravel and sand with
little silt. Low resistivity values reflected the presence of clay layers, and increasing
salinity of water gradually with the depth. The aquifer occurs at minimum depth
Rainwater harvesting is one of the available solutions to overcome water scarcity in arid and semi-arid regions with highly variable rainfall and unexpected periods of drought or floods. This study aims to identify the best rainwater harvesting system in Al-Muthanna governorate using Remote Sensing (RS) and Geographic Information System (GIS) techniques. Landsat 8 images were used to produce the land use map which shows five different classes: water (0.2%), bare soil (82.11%), built-up (15.71%), forest (0.27%), and farmland and grass (1.71%). The results revealed that the rainwater harvesting system can be applied only in the north and north-eastern parts of the study area which consists of residential and agricultural areas and
... Show More
(3)
(1)
This research aims to study the suitability of the Fatha Formation clay deposits for the brick industry in the Zurbatiya area, Wasit Government. Two sites (Al-Salam police station and Al-Taff station) were selected. The clay deposits were subjected to particle size analysis, atterberg limits, chemical and mineralogical analyses. The samples have 31.45% clay, 52.91% silt, and 15.64% sand. Chemical analyses revealed that SiO2 and CaO are the clay deposits' main components, indicating the high content of quartz and calcium carbonate. The mineralogical analysis by XRD techniques indicated that quartz, calcite, feldspar, gypsum, and dolomite are the non-clay minerals; Kaolinite, illite, palygorskite and chlorite are the mo
... Show More
This study deals with the processing of field seismic data for a seismic line located within the administrative boundaries of Najaf and Muthanna governorates in southern Iraq (7Gn 21) with a length of 54 km. The study was conducted within the Processing Department of the Oil Exploration Company using the Omega system, which contains a large number of programs that deal with processing, through the use of these programs applied predictive deconvolution of both( gap) and (spike). The final section was produced for both types. The gap predictive deconvolution gave improvement in the shallow reflectors while in deep reflectors it did not give a good improvement, thus giving a good continuity of the reflectors at
... Show MoreBrick factories distributed within the study area use fuel oil to complete the burning of the bricks, were high amounts of gases and suspended particles with different concentrations of heavy elements are produced and cause air and soil pollution. It is noted that the workers suffer from respiratory diseases and other health problems. This study is an attempt to detect the sources and concentrations of pollutants and to propose modalities for their treatment and reduction. Air and soil samples were collected from different sites in Abu Smeache brick factory in Al-Kifl area to the south of Babel city, Iraq, during two seasons (summer and winter). The process also included collecting and modelling of dust and soil
... Show More
(4)
(1)
This study aims to use claystone beds exposed in the Injana Formation (Late Miocene) at Karbala-Najaf plateau, middle of Iraq for the manufacturing of perforated and ordinary bricks. The claystone samples were assessed as an alternative material of the recent sediments, which are preferred to remain as agricultural land. The claystones are sandy mud composing of 29.1 - 39.1% clay, 37.2 - 54.8% silt and 14.1-26.8% sand. They consist of kaolinite, illite, chlorite, palygorskite, and montmorillonite with a lot of quartz, calcite, dolomite, gypsum and feldspar. Claystone samples were characterized by linear shrinkage 0.01 - 0.1%, volume shrinkage 0.1 - 0.9%, bulk density 1.2 - 2.11gm/cm3 (1.68 g / cm3 average), and the efflorescence is
... Show More
(8)
(2)
