This study aims to determine the petrophysical characteristics of the three wells in the Kifl Oilfield, central Iraq. The well logs were used to characterize hydrocarbon reservoirs to assess the hydrocarbon prospectivity, designate hydrocarbon and water-bearing zones, and determine the Nahr Umr Formation's petrophysical parameters. The Nahr Umr reservoir mainly consists of sandstone at the bottom and has an upper shale zone containing a small proportion of oil. The geophysical logs data from three oil wells include gamma-ray, resistivity, neutron, density, acoustic, and spontaneous potential logs. A gamma-ray log was employed for lithology differentiation, and a resistivity log was used to determine the response of distinct zones' productivity. The petrophysical parameters of shale volume, total porosity, effective porosity, water saturation, hydrocarbon saturation, and flushed zone saturation were evaluated using computer processing analyses (CPI). These parameters were plotted by interactive petrophysics (IP) software. The effective porosity (PHE) in the sandstone unit ranges between 3.2 and 31.2%, water saturation (SW) ranges between 6.6 and 100%, and hydrocarbon saturation and (Sh) range from 6 to 65%. The Nahr Umr Formation has moderate to low reservoir characteristics in the lower sandstone unit.
History matching is a significant stage in reservoir modeling for evaluating past reservoir performance and predicting future behavior. This paper is primarily focused on the calibration of the dynamic reservoir model for the Meshrif formation, which is the main reservoir in the Garraf oilfield. A full-field reservoir model with 110 producing wells is constructed using a comprehensive dataset that includes geological, pressure-volume-temperature (PVT), and rock property information. The resulting 3D geologic model provides detailed information on water saturation, permeability, porosity, and net thickness to gross thickness for each grid cell, and forms the basis for constructing the dynamic reservoir model. The dynamic reservoir mo
... Show MoreThis study deal with structural and stratigraphic analysis of the seismic reflection data for Hartha Formation at Nasiriyah field, the area of seismic data is about (1237) km2. Nasiriyah oil field is located in Dhi Qar Governorate, southern Iraq, and the oil field is located to the East of Euphrates River of about (38) km northwest of Nasiriyah city. which includes twenty-four (24) wells. In some wells there are oil evidences in Hartha Formation at Nasiriyah oil field, for this reason, Hartha Formation is studied.
Two reflectors are picked (top and bottom Hartha) they are defined by using synthetic seismograms in time domain for wells (Ns-1, and 3). Time and depth of Hartha Formation are drawn using velocity data of reflectors. The st
The Hartha Formation reservoir was evaluated to be produced in the near future in Y oil and J fields, West of the Tigris River in northern Iraq. Due to geological data analysis of the Hartha facies and diagenesis could enhance oil production with minimized risks, this research tried to deal with data to support the oil production. The Hartha reservoir is subdivided into five-rock units, Har-1, 2, 3, 4 and 5. It is of Heterogenic facies limestone, dolomite, dolomitic limestone and argillaceous dolomite. The Hartha Formation is a clean carbonate; it has an effective porosity. It consists of lime mudstone-packstone skeletal grain. This conclusion is based on the lithology, core microfacies, cutting, thin section and log interpret
... Show MoreThe Amarah Oil field structure was studied and interpreted by using 2-D seismic data obtained from the Oil Exploration company. The study is concerned with Maysan Group Formation (Kirkuk Group) which is located in southeastern Iraq and belongs to the Tertiary Age. Two reflectors were detected based on synthetic seismograms and well logs (top and bottom Missan Group). Structural maps were derived from seismic reflection interpretations to obtain the location and direction of the sedimentary basin. Two-way time and depth maps were conducted depending on the structural interpretation of the picked reflectors to show several structural features. These included three types of closures, namely two anticlines extended in the directions of
... Show MoreThe regular job of a reservoir engineer is to put a development plan to increase hydrocarbon production as possible and within economic and technical considerations. The development strategy for the giant reservoir is a complex and challenging task through the decision-making analysis process. Due to the limited surface water treatment facility, the reservoir management team focuses on minimizing water cut as low as possible by check the flow of formation and injected water movement through the Mishrif reservoir. In this research, a representative sector was used to make the review of water injection configuration, which is considered an efficient tool to make study in a particular area of the entire field when compared with the ful
... Show MoreThe Aaliji Formation in wells (BH.52, BH.90, BH.138, and BH.188) in Bai Hassan Oil Field in Low Folded Zone northern Iraq has been studied to recognize the palaeoenvironment and sequence stratigraphic development. The formation is bounded unconformably with the underlain Shiranish Formation and the overlain Jaddala Formation. The microfacies analysis and the nature of accumulation of both planktonic and benthonic foraminifera indicate the two microfacies associations; where the first one represents deep shelf environment, which is responsible for the deposition of the Planktonic Foraminiferal Lime Wackestone Microfacies and Planktonic Foraminiferal Lime Packstone Microfacies, while the second association represents the deep-sea environme
... Show MoreThe Hartha Formation (age Late Campanian – Early Maastrichtian) is considered an important oil reservoir in Iraq. The petrography and the diagenetic features were determined based on the analyses of 430 thin sections from selected wells within Balad and East Baghdad oil fields, Ba-2, Ba-3, EB-53, Eb-56 and EB-102.
The most important and common diagenesis processes that affect Hartha Formation include Cementation, Neomorphsim, Micrtitization, Dolomitization, Compaction, Dissolution, and Authigenic minerals. This diagenesis deformation on Hartha Formation has overall accentuated the reservoir quality heterogeneity.
The reservoir quality evolution is affected by destruction by grain compaction mechanical and chemica
... Show MoreThe study is an attempt to predict reservoir characterization by improving the estimation of petro-physical properties (porosity), through integration of wells information and 3D seismic data in early cretaceous carbonate reservoir Yamama Formation of (Abu-Amoud) field in southern part of Iraq. Seismic inversion (MBI) was used on post- stack 3 dimensions seismic data to estimate the values of P-acoustic impedance of which the distribution of porosity values was estimated through Yamama Formation in the study area. EMERGE module on the Hampson Russel software was applied to create a relationship between inverted seismic data and well data at well location to construct a perception about the distribution of porosity on the level of all uni
... Show MoreThe studied succession (Lower Miocene-Early Middle Miocene) In central Iraq is distinguished by a wide range of fossils, mostly benthic foraminifera, and other fossils including bivalves, gastropods, echinoids fragments, red algae and coral are also presented. Index fossils of benthic foraminifera have been used for the purpose of determining the age of the Euphrates and Jeribe formations, because of their young age, wide geographical distribution and abundance in the selected wells.
The present study involves four selected wells of Ajil oil field and in terms of the biostratigraphy of the Euphrates, Dhiban, and Jeribe formations depending on benthic foraminifera and other associated fossils. Some of these fossils have a short ve
... Show MoreFlow unit and reservoir rock type identification in carbonates are difficult due to the intricacy of pore networks caused by facies changes and diagenetic processes. On the other hand, these classifications of rock type are necessary for understanding a reservoir and predicting its production performance in the face of any activity. The current study focuses on rock type and flow unit classification for the Mishrif reservoir in Iraq's southeast and the study is based on data from five wells that penetrate it. Integration of several methods was used to determine the flow unit based on well log interpretation and petrophysical properties. The flow units were identified using the Quality Index of Rock and the Indicator of Flow Zone. Th
... Show More