A 3D velocity model was created by using stacking velocity of 9 seismic lines and average velocity of 6 wells drilled in Iraq. The model was achieved by creating a time model to 25 surfaces with an interval time between each two successive surfaces of about 100 msec.  The summation time of all surfaces reached about 2400 msec, that was adopted according to West Kifl-1 well, which penetrated to a depth of 6000 m, representing the deepest well in the study area. The seismic lines and well data were converted to build a 3D cube time model and the velocity was spread on the model. The seismic inversion modeling of the elastic properties of the horizon and well data was applied to achieve a corrected veloci

An interpretive (structural and stratigraphic) study of the two,-dimensional seismic, data of East Nasiriya area (30 km to the south east of Nasiriya oil field within Thi-Qar province, southeastern Iraq) was carried out using Petrel 2017 program. The study area has an importance due to its location between many oil fields, but still without exploration of oil wells. Twenty five seismic lines were used, date back to different types of seismic surveys conducted in the region at different time periods.  Also, the seismic velocity surveys of the nearest wells to oil fields, such as Nasiriya-1 and Subba-8, in addition to their sonic and density logs were used. A synthetic seismogram with a good matching with the seismic section was achie

The seismic reflection and gravity data were used to detect the tectonic boundaries in Kut-Hai-Fajir and surrounding areas, central Iraq. The depth maps of Dammam, Nhr Umr, and Sulaiy, formations were constructed and used to detect some boundareis in the study area. The residual gravity map and Total Horizantal derivative (THDR) also used to detected the tectonic boundaries. It is obtained that most boundaries or faults found in the deep formations; while some of them showen in the shallow fomations. The faults or boundaries obtained from gravity intrpretation mostly coincied with the deepest formation boundaries. Generally, the grvity anomalies conform the morphological feature locations within the depth maps of the formations. Many lon

This study deals with interpretation of stratigraphic and structural of Afaq structure area central Iraq in Qadisiyah province, about 25 km north of Diwaniyah, by using 2D seismic data. Synthetic traces are prepared by using available data of the well (WK-1)using a petrol software program to define and picking the reflectors on the seismic section. Structure interpretation includes picking a top of Zubair Formation (Late Cretaceous), while stratigraphic interpretation includes two reflectors Yamama and Gotnia Formation (Upper-Late Jurassic). Structure interpretation of Zubair Formation shows that the area a several minors and a short extend of faults, the fault system extends (NE-SW) direction. The structural interpretation of time and d

The present study includes the evaluation of petrophysical properties and lithological examination in two wells of Asmari Formation in Abu Ghirab oil field (AG-32 and AG-36), Missan governorate, southeastern Iraq. The petrophysical assessment was performed utilizing well logs information to characterize Asmari Formation. The well logs available, such as sonic, density, neutron, gamma ray, SP, and resistivity logs, were converted into computerized data using Neuralog programming. Using Interactive petrophysics software, the environmental corrections and reservoir parameters such as porosity, water saturation, hydrocarbon saturation, volume of bulk water, etc. were analyzed and interpreted. Lithological, mineralogical, and matrix recogniti

   Rotating cylinder electrode (RCE) is used . in weight loss technique , the salinity is 200000 p.p.m, temperatures are (30,5060,7080Co) . the velocity of (RCE) are (500,1500,3000 r.p.m). the water cut (30% , 50%). The corrosion rate of carbon steel increase with increasing rotating cylinder velocity. In single phase flow, an increase im rotational velocity from 500 to 1500 r.p.m, the corrosion rate increase from 6.88258 mm/y to 10.11563 mm/y respectively.

   In multiphase flow, an increase in (RCE) from 500 to 1500 r.p.m leads to increase in corrosion rate from 0.786153 to 0.910327 mm/y respectively. Increasing brine concentration leads to increase in corrosion rate at water cut 30%.

This study deals with the processing  of field seismic data for a seismic line located within the administrative boundaries of Najaf and Muthanna governorates in southern Iraq (7Gn 21) with a length of 54 km. The study was conducted within the Processing Department of the Oil Exploration Company using the Omega  system, which contains a large number of programs that deal with processing, through the use of these programs applied  predictive deconvolution  of both( gap) and (spike). The final section was produced for both types. The gap predictive deconvolution  gave improvement in the shallow reflectors while in deep reflectors it did not give a good improvement, thus giving a good continuity of the reflectors at

      A seismic study was conducted to re-interpret the Qasab and Jawan oil field in northern Iraq, south of the city of Mosul, by reprocessing and interpreting many seismic sections of a number of field surveys that included the field area. Two reflectors are detected, represented by Hartha Formations which were deposited during the Cretaceous age and Euphrates Formation which was deposited during the Tertiary age in order to stabilize the structural image of this field. The study was achieved by reinterpreting seismic sections using the Petrel program, where time, velocity  and depth maps were prepared for the two formations.

The study showed that the Qasab and Jawan fields generally consist of a s

     The density-velocity relation is an important tool used to predict one of  these two parameters from the other. A new empirical density –velocity equation was derived in Kf-4 well at Kifl Oil Field, south of Iraq. The density was derived from Gardner equation and the results obtained were compared with the density log (ROHB) in Kl-4 well. The petrophysical analysis was used to predict the variations in lithology of Yamama Formation depending on the well logs data, such as density, gamma, and neutron logs. The physical analysis of rocks depended on the density, Vp, and Vs  values to estimate the elastic parameters, i.e. acoustic impedance (AI) and Vp/Vs ratio, to predict the lithology and hydrocarbon i